NETC | CNC Machinery | SB-20RE
New England Tool Corporation
[an error occurred while processing this directive]


New low cost machine with excellent cost-performance ratio

This new machine of SB series also convices with competitiveness.

Other advantages:

  • C-axis new also on sub spindle
  • for positioned pick-up and thread cutting
    on sub spindle
  • more power and higher speed on sub spindle (max. 9'000 rpm)

Printable PDF Brochure

Tool kinematics

sb16e kinematik

Specifications SB-20RE

Max. machining diameter Ø 20mm (25/32 in)
Max. headstock stroke 205mm (8in)
Tool 6 tools (12mm) / 7 tools (10mm)
4-Spindle sleeve holder Number of tools Front 4 tools
Rear 4 tools
Max. drilling capability Ø 12mm (1/2in)
Max. tapping capability M10 x P1.5
Power driven att. Number of tools Cross power driven att. 2 tools (ER11)
Cartridge type: 3 Pos
Max. drilling capability Ø 7mm (9/32in) ER16 / Ø6mm (15/64in) ER11
Max. tapping capability M6 x P1.0 (ER16) / M5 x P0.8 (ER11)
Power-driven att. spindle speed Max. 6,000min-1 (ER16) / Max. 8,000min-1 (ER11)
Power-driven att. drive motor 1.0kw (continuous)/ 1.2kw (5min./30%ED)
Rapid feed rate 35m/min (X1,Y1,Z1X2,Z2)
Main spindle indexing angle C-axis control
Main spindle speed Max. 10,000min-1
Main spindle motor 2.2kw (continuous)/ 3.7kw (10min./25%ED)
Coolant tank capability 188l
Dimensions (W x D x H) 2,070 x 1,177 x 1,760 mm
Center height 1,060mm
Weight 1,700kg
Power consumption 3.7 KVA
A-weighted sound pressure 74dB

Backworking attachment SB-20RE

Max. chucking diameter Ø 20 mm (25/32 in)
Max. pick-up part length 80 mm (3-5/32 in)
Max. parts projection length 30 mm (1-3/16 in)
Back 4-Spindle  
Number of tools 4 tools
Max. drilling capability Stationary tool Ø 8 mm (5/16 in)
Power driven tool Ø 6 mm (15/64 in)
Max. tapping capability Stationary tool M6 x P1.0
Power driven tool M5 x P0.8
Power driven att. spindle speed Max. 8,000min-1 (OP)
Power driven att. drive motor 0.75kw (OP)
Sub spindle indexing angle C-axis control
Sub spindle speed Max. 9,000min-1
Sub spindle speed control AC spindle drive
Sub spindle motor 0.55kw (continuous)/ 1.1kw (15min/40%ED)

* Specifications are subject to change

[an error occurred while processing this directive]