NETC | CNC Machinery | SR=10J
New England Tool Corporation SR-10J
[an error occurred while processing this directive]

SR-10JSR-10J type C

Small, super-fast and high profitability This lathe sets new standards in the range up to Ø 10mm

It is able to combine those positive qualities for which so far the search in this range was vain before.

Its high profitability, its small dimensions as well as its generous standard equipment assure a flexible production of your products.

STAR reliability and service included.

  • Achieves an overall cost-reduction with high rigidity.
  • A depth of  775 mm. The productivity per unit area can be increased owing to the footprint size.
  • Reducing idle time by using: a layout where the tool post traveling distance is shorter than a normal, incorporating an approaching function and a high-speed feed.
  • Overlap machining is now available for the front and back sides by using a back-working unit.
Printable PDF Brochure

Tool kinematics:

sr10j kinematik

 

Specifications SR-10J type C

Max. machining diameter Ø 10 mm
Max. headstock stroke 135 mm stationary guide bush
105 mm revolving guide bush
Tool 6 tools
4-Spindle sleeve holder
Number of tools Front 4 tools
Rear 4 tools
Max. drilling capacity Ø 6 mm
Max. tapping capacity M5 x P0.8
Power driven att.
Number of tools 3 tools
Max. drilling capacity Ø 4 mm
Max. tapping capacity M3 x P0.5
Main spindle min. indexing degree C-axis control
Main spindle speed Max. 15,000min-1
Main spindle motor 2.2kw (continuous)/3.7kw (15min.)
Rapid feed rate 35m/min (X,Y,Z,XB,ZB)
Power-driven att. spindle speed Max. 10,000min-1
Power-driven att. drive motor 0.5kw
Coolant tank capacity 85 L
Dimension (W x D x H) 1865 x 775 x 1695 mm
Center height 1,050mm
Weight 1400 kg
Power consumption 3.5KVA
   

Backworking attachment SR-10J type C

Max. chucking diameter Ø 10 mm
Max. length for front ejection 70 mm
Max. parts projection length 20 mm
Back 4-Spindle unit:  
Number of tools 4 tools: OP
Max. drilling capability Stationary tool Ø4mm
Power driven tool Ø6mm
Max. tapping capability Stationary tool M3xP0.5
Power driven tool M5xP0.5
Sub spindle min. indexing angle 15°:OP
Sub spindle speed Max. 10,000min-1
Sub spindle motor 0.55kw (continuous)/1.1kw (15min.)

* Specifications are subject to change

[an error occurred while processing this directive]