CMZ TD Series

Category: CMZ

INFORMATION

There is a machine for each type of machining. Those looking for a highly accurate and reliable high precision lathe have a wide range of possibilities in the TD Z800-Z1350 Series. This product range joins the smaller size lathes of the TA Series, offering a CNC lathe that allows multiple configuration options, always adapted to the demands and particularities of each production process. All models have a turret with a built-in motor offering 12,000 rpm driven tools, cooled with oil. Machining times are reduced thanks to the integrated spindles. Laser compensation is also a standard feature on all TD Z800-Z1350 Series machines. The automation of both short and long batches is possible with the GL20 and GL100 Gantry robots, that will lift up to 100 kg. Delve into the TD Z800-Z1350 Series and find the high precision lathe you are looking for.

BENEFITS

High precision and surface quality thanks to oil-cooled, integrated spindles that minimize vibration and thermal drift.
Powerful turret performance with up to 12,000 rpm driven tools for efficient milling, drilling, and complex operations.
Flexible configurations with multiple spindle options and two Z-axis lengths (Z800 / Z1350) to suit a wide range of part sizes.
Stable accuracy over long runs supported by laser compensation and a rigid cast-iron structure.
Shorter cycle times achieved through direct-drive components, fast tool indexing, and the machine’s overall rigidity.
Automation ready through compatibility with gantry loaders and robotic handling for unattended, high-volume production.

CONFIGURATIONS

With its fully modular design, the TD Series allows you to build the machine around your production needs.

Bed length options

Select the ideal Z-axis capacity to match your part dimensions and floor-space requirements.

Z800

Z-axis travel: 800mm

Z1350

Z-axis travel: 1350mm

Main spindle options

Select the spindle capacity that aligns with your bar diameter and machining power requirements.

TD15

Maximum bar diameter: 52 mm
Spindle power: 19 HP

TD20

Maximum bar diameter: 66 mm
Spindle power: 30 HP

TD25

Maximum bar diameter: 66 mm
Spindle power: 47.6 HP

TD30

Maximum bar diameter: 66 mm
Spindle power: 57 HP

TD35

Maximum bar diameter: 95 mm
Spindle power: 65 HP

TD45

Maximum bar diameter: 127 mm
Spindle power: 69 HP

TD55

Maximum bar diameter: 192 mm
Spindle power: 69 HP

ACCURACY AND RELIABILITY

INTEGRATED OIL-COOLED SPINDLES

Direct drive spindles produce much lower noise levels and better surface finishes. In addition, with a double row of roller bearings the spindles can withstand substantial impacts without damage.

Turret options

Select the turret capacity that best fits your typical tool requirements and part complexity.

12 tool positions

16 tool positions

20 tool positions

17.6HP, 105NM, 12,000 RPM

TURRET WITH A BUILT-IN MOTOR AND HYDRAULIC CLAMPING

This high precision lathe incorporates a robustly built oil-cooled turret whose large-diameter tool-holder disk reduces interference between tools and chuck. There are three turret options: 12-, 16-, and 20-position disks, with an indexing time of 30º in 200 ms.