Eurotech TD Z1350

INTEGRATED SPINDLES

The spindle is driven through a motor integrated in the headstock body itself.

This construction ensures an outstanding spindle robustness and vibration dampening
that significantly improves surface finish and roundness.

Additionally, spindle acceleration and braking times are shortened by about 20-50% because of the reduced inertia and higher loading capacity of oil-cooled headstocks.

BENEFITS

  • Prismatic Box Guide Ways
  • Roller Spindle Bearings (oil cooled)
  • Integral Spindle Motors (oil cooled)
  • 12,000 RPM / 55 lb.ft. Live Tools
  • Laser Compensation in all Axes including C-axis
  • Thermal Sensor in bedplate controls oil cooling:
    Spindles, Turrets and Ballscrew Mounts

SPECIFICATIONS

Max. turning diameterØ 550 mm
Max. diameter of swinging over bedØ 950 mm
Maximum diameter of swinging over slidesØ 715 mm
Distance between spindle an tailstock center1465 mm
Distance between center of spindles826 mm
X-axis travel380 mm
Z-axis travel1350 mm
Y-axis travel+80 / -60 mm
B-axis travel1350 mm
Fast feedrate X30 m/min
Fast feedrate Z30 m/min
Fast feedrate Y15 m/min
Fast feedrate B11 m/min
Maximum speed4500 rpm
Bearing outside diameter150 mm
Bearing inside diameter100 mm
Spindle noseASA 6’’A2
Spindle inside diameter61
Maximum bar diameter52
Chuck diameter175/210
Chuck bore56/52
Spindle power18.7 / 10.7 hp
Turning torque215 ft-lb
Number of turret positions16
Section of toolsn25x25 (Ø50) mm
Changing time22.5º 0,2s - 180º 0.5s
Interlocking force at 45 bar8000 kgf 
Number of driven tools16
Turning speed12,000 rpm
Sub spindle maximum speed4000 rpm
Sub spindle bearing outside diameter170 mm
Sub spindle bearing inside diameter110 mm
Sub spindle bar diameter66 mm
Sub spindle chuck diameter210 mm
Sub spindle bar diameter66 mm
Sub spindle chuck bore66 mm
Sub spindle power29.5 / 20 hp
Sub spindle turning torque270 / 211 ft-lb
Coolant tank355 litres
Hydraulic oil tank10 litres
Lubrication oil tank4 litres
Total weight9500 kg
Dimensions4088X2129X2051 mm