Eurotech TD Z3200


The spindle is driven through a motor integrated in the headstock body itself.

This construction ensures an outstanding spindle robustness and vibration dampening
that significantly improves surface finish and roundness.

Additionally, spindle acceleration and braking times are shortened by about 20-50% because of the reduced inertia and higher loading capacity of oil-cooled headstocks.


  • Prismatic Box Guide Ways
  • Roller Spindle Bearings (oil cooled)
  • Integral Spindle Motors (oil cooled)
  • 12,000 RPM / 55 lb.ft. Live Tools
  • Laser Compensation in all Axes including C-axis
  • Thermal Sensor in bedplate controls oil cooling:
    Spindles, Turrets and Ballscrew Mounts


Max. turning diameter Ø 550 mm
Max. diameter of swinging over bed Ø 950 mm
Maximum diameter of swinging over slides Ø 715 mm
Distance between spindle an tailstock center 3315 mm
Distance between center of spindles 826 mm
X-axis travel 380 mm
Z-axis travel 3200 mm
Y-axis travel +80 / -60 mm
B-axis travel 3200 mm
Fast feedrate X 30 m/min
Fast feedrate Z 30 m/min
Fast feedrate Y 15 m/min
Fast feedrate B 11 m/min
Maximum speed 4500 rpm
Bearing outside diameter 150 mm
Bearing inside diameter 100 mm
Spindle nose ASA 6’’A2
Spindle inside diameter 61
Maximum bar diameter 52
Chuck diameter 175/210
Chuck bore 56/52
Spindle power 18.7 / 10.7 hp
Turning torque 215 ft-lb
Number of turret positions 16
Section of toolsn 25x25 (Ø50) mm
Changing time 22.5º 0.2s - 180º 0.5s
Interlocking force at 45 bar 8000 kgf 
Number of driven tools 16
Turning speed 12,000 rpm
Driven tools power 29.5 / 20 hp
Driven tools turning torque 77.5 ft-lb
Coolant tank 470 litres
Hydraulic oil tank 10 litres
Lubrication oil tank 4 litres
Total weight 13000 kg
Dimensions 6375x2361x2236 mm