High Pressure Pump EU-1000-2
Category: EU Pumps

INFORMATION

PressureTech is New England Tool Corporation’s next generation of their popular high pressure coolant
pumps. The Turret Series replaces the NJ1150 units for turning centers and turret lathes.

The new PressureTech coolant system packs all the same power as before, but now in a more compact and
user friendly package. This redesign also has additional features making the system even more reliable.

SPECIFICATIONS

Max Output Pressure 2 x 1,000 psi (2 x 69 bar)
Number of Output Lines 2
Max Flow Rate 2 x 6.25 gpm (2 x 20 L/min)
Motor 2 x 5 hp
Power Requirement 3 Phase 400/460 V
Type of Coolant Oil and Water
Type of Pump Diaphragm
Heat Exchanger N/A
Filter Ability 5 Micron

BENEFITS
of High Pressure

  • Reduced Cycle Times
  • Chip Management
  • Increased Tool Life
  • High-speed Drilling
  • Improved Surface Finish
  • Greater Throughput

BENEFITS
of the EU Series

  • Dedicated Power to each Turret
  • Dedicated Filtration to each Turret
  • Proven Reliability
  • Space Saving Design
  • Ease of Maintenance
EU-1000-1-&-1000-2

Dedicated Turret Power

This system uses a pump motor dedicated to each turret.

  • Full power dedicated to each turret (1,000 psi)
  • No loss of power to turrets when others turn on/off.
  • Less wear on unit over it’s life

Electrical

  • Touch proof electrical cabinet
  • Uses only circuit breakers, no fuses
  • Safely operates from -25 to 60°C (-13 to 140°F)
  • Meets all CE standards and regulations
EU-1000-1-&-1000-2

Reliability

Every unit undergoes an extensive quality assurance process before leaving the facility.

  • High quality components used throughout
  • Only JIC fittings, no hose clamps
  • Redundant qualification procedure
  • All units leak tested
EU-1000-1-&-1000-2-Maintenance-and-Filtration

Maintenance and Filtration

Maintenance is made easier and less frequent by independent filter
vessels dedicated to each pump/turret combination. Filter bags can
be purchased with different micron ratings.
EU-1000-2-pump applied