Managed Preventative
Maintenance Service
Did you Know?
Unplanned machine breakdown will usually cost at least 5 times more than an annual preventive maintenance (PM) service.
Many companies assume that if their machine is running well and parts within tolerance that it is in good condition. Breakdowns due to wear or neglect can be eliminated 100% of the time with the correct PM schedule.
The expert technicians at New England Tool Corp. can provide a managed PM plan. This includes a service schedule tailored to your specific needs as well as diagnostic reports and record keeping of machine maintenance.
Why Choose NETC?
Customized Service
If needed, NETC will create Preventive Maintenance (PM) service program to fit your needs and your budget.
Managed Service Program
NETC will manage your PM program by providing annual service reminders, easy scheduling and knowledgeable personnel.
We Work Around YOUR Schedule
We plan your PM around your schedule. This can be done between jobs, so your machines are up and running when you need them to be.
Record Keeping & Reports
NETC will maintain detailed maintenance and service records. This machine maintenance history report will help diagnose problems and trends to help custom tailor service to your specific needs.
Service Many Makes & Models
NETC will perform preventative maintenance on many machine makes and models, not just the machines purchased from us.
Experienced Certified Technicians
All service is performed by factory certified service engineers. We take pride in being knowledgeable, courteous and committed to customer satisfaction.
We Have the Part & the Tools
NETC stocks all common OEM parts and tools to get the job done in an efficient and timely manner.



Mechanical System
- Check collet closure system
- Check machine level
- Inspect spindle locking mechanism
- Change hydraulic oil
- Inspect drive belts
- Inspect barfeeder alignment
- Inspect way cover wipers
- Check tool change operation
- Inspect counter unit system
- Check & adjust backlash
- Inspect lines, hoses and cables
- Remove critical covers and clean chips out
- Remove and clean spindle sleeves
- Check guide bushing bearings
- Check all spindles for vibration and noise
Way Lube System
- Clean filters
- Inspect lines and fittings
- Verify lube/pump operation
- Drain and clean tank
Air System
- Clean filters
- Check pressure/adjust regulator
- Inspect system for leaks
Electrical System
- Clean electrical cabinet
- Check voltages
- Inspect connections/terminal
- Inspect grounds
- Replace or clean fan filter
- Check limit switches/safety locks
- Keypad operation
- Check all fans
Note: Not all service applicable to every machine model

Mechanical System
- Check collet closure system
- Check machine level
- Verify spindle sweep
- Check spindle orientation
- alignment
- Change gearbox oil
- Inspect drive belt
- Inspect & adjust live tool
- drive unit
- Inspect spindle condition
- Inspect way cover wipers
- Check tool change operation
- Clean/lubricate tool changer
- Check & adjust X, Y, Z
- backlash
- Inspect lines, hoses and
- cables
- Remove critical covers and
- clean chips out
- Inspect spindle brake
- Check all spindles for vibration and noise
- Verify turret/spindle alignment
Way Lube System
- Clean filters
- Inspect lines and fittings
- Verify lube/pump operation
- Drain and clean tank
Coolant System
- Operation check of pump & motor
Electrical System
- Clean electrical cabinet
- Check voltages
- Inspect connections/terminal
- Inspect grounds
- Replace or clean fan filter
- Check limit switches/safety
- locks
- Keypad operation
- Check all fans
Air System
- Clean filters
- Check pressure/adjust
- regulator
- Inspect system for leaks
Note: Not all service applicable to every machine model


