INFORMATION
Open loop industrial chillers control the temperature of a liquid in a remote open tank or sump by continuously recirculating it. The liquid is drawn from the tank, pumped through the chiller and back to the tank.
NETC open loop refrigerated chillers use refrigeration as the media for cooling, while Turmoil non-refrigerated chillers rely on simpler techniques such as air or water flowing over coils containing the coolant to regulate temperature
Evaporators are brazed, enhanced stainless steel plates. Piping and fittings are copper, bronze, steel, or hose. Self-priming, cast-iron gear pumps are standard. An in-line filter for all incoming oil is also standard.
GALLERY
SPECIFICATIONS
| Rated Cooling Capacity | 60000 BTU/hr |
| 17600 W | |
| 15000 kcal/hr | |
| Comp. | 5HP |
| Standard Pump Capacity | 30 GPM |
| 112 LPM | |
| Standard Voltage | 208-230/60/3 |
| 460/60/3 | |
| Standard Dimensions** | 36 x 50 x 56 in |
| 92 x 127 x 144 cm | |
| Shipping Weigth | 850 LB |
| 395 KG |
OPTIONS
Digital Temperature Controller (CTC)
Provides close temperature control (±0.5°F).
Displays both set-point and coolant temperature.
Temperature Fault Interlock (HT)
Indicates coolant temperature is out of range.
In-Line Filter (ILF)
Ensures clean coolant.
Ambient Tracking Controller (ATC)
A dual input digital temperature controller allows the coolant temperature to track ambient temperature at a constant, adjustable differential. Displays both ambient and coolant temperature.
Low Level Interlock (LL)
Indicates coolant level is low.
Pure System (PS)
Coolant only comes in contact with stainless steel or plastic.
Optional Pumps (OP)
A variety of pumps are available to meet almost any flow and pressure requirement for both water and oil-based coolants.
Flow Meter/Switch (FSM)
Adjusts coolant flow to the optimum setting.
Non-Refrigerated Cooler (NRCW & NRCA)
Uses central chilled water or ambient air instead of refrigeration. Saves space and maintenance.
Low Flow Interlock (LF)
Prevents damage to machine on the loss of flow.
In-Line Heater (ILH)
Warms up coolant to optimum operating temperature.
Water-Cooled Condenser (W)
For use with tower or city water. Removes heat from the work area while saving space and maintenance.